-
Barrier Sensors
Taut-Wire Perimeter Intrusion Detection System DTR - 2000
It is a physical intrusion barrier - taut-wire fence with fence posts. It consists of an electromechanical sensor which is installed on either an existing carrying metal fence (provided this fence meets certain criteria) or on a fence specifically constructed for that purpose. After activation, the sensor sends a signal to the Computerized Control Center (CCC). There the signal is converted into an alarm that clearly shows the type and location of the penetration attempt.
When installed correctly, less than one false alarm per kilometer is guaranteed for three months, which means almost 100% detection of the violation. Since it is assumed that a force of less than 15 kg. does not activate the sensor, small animals like rabbits, dogs, snakes, birds and others will NOT cause an alarm.
The barrier electromechanical sensor is patented and tuned for any gentle shifting of earth layers and temperature changes and does not require frequent adjustments. It is set by the manufacturer of maximum sensitivity. The CCC monitors the condition of all sensors and, in case of repair of one or a group of sensors, the others continue to function normally.
The system is installed on an existing metal fence (meeting certain criteria) or a fence specially constructed for that purpose.
Additional alarm devices such as spotlights, video cameras, sirens, and more can be mounted on the touchscreen and activated either manually or via the sensor signal.
It has no weather, terrain or other environmental limitations with a virtual absence of either False Alarms or Nuisance Alarms. The system is absolutely precise in locating the intruder. It has no practical height limitations of the fence. The costs for maintenance of DTR-2000 are very low.
The system is extremely reliable for sites requiring a high level of security.
Perimeter Protection System “Electro - Fence”
This system offers the perfect solution for effective perimeter protection. The fence gives the intruder a short, sharp, non-lethal but painful shock and immediately transmits an alarm indication to the control room, which indicates where the intrusion took place. The combination of the electrical shock and the intruder detection provides a double protection system which delays access and entrance to the protected areas.
The “Electro-Fence” system can be used both independently and as a fully integrated security system. “Electro-Fence” can be supplied in the following standard configurations: Vertical, Overhang, V-top and Concertina, or a combination of the Concertina and one of the prior configurations.